Internal Combustion

Las Vegas Material Handling Preventitive Maintenance 

Internal Combustion 

Las Vegas Material Handling offers two Preventive Maintenance options for internal combustion engines;

Plan A (Approx. 600 Hours)

• Blow off unit when required
• Check operation of horn, brake, steering, parking brake & gauges
• Check all oil levels — Differential, Transmission, Oil clutch, Hydraulic system, Master cylinder
• Check hydraulic pump, control valve and all lines for leaks
• Check mast and carriage for operation of free play
• Check lift and tilt cylinders
• Lubricate unit
• Change engine oil and filter
• Change air filter, if necessary
• Check radiator
• Check fan belt
• Tune up engine, points, plugs, rotor and condenser. Replace distributor cap and leads, if necessary
• Check starter and charging system
• Check brake shoes and wheel cylinders, repack bearings (when accessible)
• Check master cylinder and brake lines
• Check steering system and repack steer wheel bearings
• Check fuel system carburetor, regulator, vacuum switch, lock off solenoid, fuel pump and all lines for leaks
• Check and change transmission oil and filter, if necessary
• Check hydraulic oil, change hydraulic oil, filter, and external breather, if necessary

Plan B (Approx. 200 Hours)

• Blow off unit when required
• Check operation of horn, brake, steering, parking brake & gauges
• Check all oil levels — Differential, Transmission, Oil clutch, Hydraulic system, Master cylinder
• Check hydraulic pump, control valve, and all lines for leaks
• Check mast and carriage for operation and free play
• Check lift and tilt cylinders
• Lubricate unit
• Change engine oil and filter
• Change air filter, if necessary
• Check radiator
• Check fan belt
• Check points, plugs, rotor and distributor cap
• Check battery and clean posts
• Check starter and charging system